FAQ
Q: What are the Stubby Buddy cage dimensions?
A:
Stub/Enclosed:
Cage inside Diameter:35mm
Cage outside Diameter: 45mm
Cage inside Length: 27mm
Cage outside Length: 37mm
Button:
Cage inside Diameter:35mm
Cage outside Diameter: 45mm
Cage inside Length: 16mm
Cage outside Length: 20mm
Null:
Shaft cap outside Diameter: 45mm
Cage shaft inside Length: -21mm
Cage shaft outside Length: 51mm
Total effective negative pushback as compared to Stub position is 55mm.
Q: What are the Stubby Buddy ring dimensions?
A: Ring dimensions will change based off the size of ring you order. But for a 45mm ring they are as follows:
Ring inside Diameter: 45mm
Ring outside Diameter: 55mm
Ring to cage ball gap for standard splitter: roughly 20mm vertically 25mm diagonally point to point.
Splitter internal height for standard splitter: 30mm
Ring to cage ball gap for low profile splitter: roughly 10mm vertically 16mm diagonally point to point.
Splitter internal height for low profile splitter: 20mm
Q: What are the Chubby Buddy cage dimensions?
A:
Stub/Enclosed:
Cage inside Diameter: 40.25mm
Cage outside Diameter: 51.75mm
Cage inside Length: 31.05mm
Cage outside Length: 42.55mm
Button:
Cage inside Diameter: 40.25mm
Cage outside Diameter: 51.75mm
Cage inside Length: 18.4mm
Cage outside Length: 23mm
Null:
Shaft cap outside Diameter: 51.75mm
Cage shaft inside Length: -24.15mm
Cage shaft outside Length: 58.65mm
Total effective negative pushback as compared to Stub position is 63.25mm.
Q: What are the Chubby Buddy ring dimensions?
A: Ring dimensions will change based off the size of ring you order. But for a 51mm ring they are as follows:
Ring inside Diameter: 51mm
Ring outside Diameter: 63mm
Ring to cage ball gap for standard splitter: roughly 23mm vertically 28.75mm diagonally point to point.
Splitter internal height for standard splitter: 34.5mm
Ring to cage ball gap for low profile splitter: roughly 11.5mm vertically 18.4mm diagonally point to point.
Splitter internal height for low profile splitter: 23mm
Q: Are Stubby Buddies "Body Safe"
A: The quick answer is yes in almost all circumstances they are body safe. We encourage you to read our "Body Safe Guide" to fully understand the nuances of body safe chastity cages.
Q: Can I wear the "Stub" long term?
A:Yes! The "Stub" was specifically designed for long term use. The relatively open design makes cleaning a breeze.
Q: I'm pretty small/a grower, will the "Stub" fit me?
A: Yes! The "Stub" is designed for smaller individuals and growers primarily. The entrance to the cage is narrower than the cage itself which holds you in place to help prevent accidental pullouts due to small flaccid size. Overall, the "Stub" is a small and fits most average/below average individuals well.
Q: I'm pretty big, Will the "Stub" fit me?
A: Probably! Most people will be able to squeeze in without issue, however for those with a little extra in terms of length you can purchase the "Stubby Buddy Collar" which is a add on that increases the internal length of the cage by 10mm per collar.
Q: Is the "Null" cage suitable for long term wear?
A: Probably not. The "Null" is meant primarily as a short term or play time cage. Smaller individuals may find long term wear possible, but it is entirely dependent on anatomy. Either way using the bathroom while wearing the "Null" is not a quick and easy affair.
Q: I'm pretty big, will I be able to wear the "Null" for short term/play sessions?
A: Most likely but how comfortable it will be is entirely dependent on anatomy. A quick test you can do is while flaccid use two fingers to push you penis completely inside your body. With your fingers holding pressure try to get aroused without allowing your penis to grow externally. This will give you a vague idea of how the "Null" may feel for you.
Q: Do Stubby Buddy cages support the use of waist harnesses?
A: Yes! In fact, they are highly recommended. All SB cages have two mounting holes on the top and bottom of the ring to allow you to pass a section of rope (we recommend thinner diameter 10mm'ish bondage rope) through to tie a rope around your waist to support the top of the ring and another rope that passes under between you legs to further tighten the bottom half of the cage to your skin.
Q: How durable are Stubby Buddy cages?
A: Nylon parts are incredibly durable, and will take a lot of abuse. Uncoated nylon prints can be subject to colour bleed/loss over time and coated nylon parts can eventually wear down to the underlying sls print, but that would take quite a long time.
Q: What is your warranty? If my cage breaks, will you replace it?
A: If the cage breaks within the first two weeks we will offer to remake and reship the broken part at no cost.
Q: Can I purchase the stl files and print my own device?
A: No. Our STL files are not freely or commercially available and there is no immediate or future intent to make them so. While we welcome DIY'ers and make many of our unique methods public knowledge so DIY'ers and other like minded cage makers can follow in our footprints, we do have to keep a tight lid on our proprietary design files in order to sustain our business model and further the development of our products.
Q: I want to get a custom badge, is their anything you can't put on them?
A: Two lines of 5 characters fits comfortably. Sometimes we can fit 6-8 characters on one line and 5 or less on the second. Any text phrase requests that are deemed obscenely inappropriate will be denied and refunded. We ask you to please Keep it legal and keep it respectful to all race/genders.
Q: Is Stubby Buddy Escape Proof?
A: As much as I would like to say yes, the reality of chastity cages apposed to chastity belts is for the vast majority of users you will be able to squirm and wiggle yourself out of confinement if you try hard enough. Our Low-Profile ring can increase the security of the device and prevent some accidental and purposeful escapes.
Q: Are your packages shipped discreetly?
A: We aim to ship our packages as discreetly as possible, and are shipping labels just show as coming from "CSB". However with importation rules changing and becoming more strict in some countries we often have to declare the package contents with zero ambiguity on the Certificate of Origin and Commercial Invoice which is attached to the exterior of the box. Usually these documents should be folded and hidden from view by a cover page, however as the customs agent opens and checks the documents we cannot guarantee they put them back in the proper order.
Q: Where will my order ship from?
A: Most orders ship from Hamilton Ontario, though some products may ship from Alberta Canada.
Q: You don't ship to my location :(
A: Unfortunately we are currently unable to ship to EU countries due to changes in the GPSR. We are still working towards a solution to this issue.
Q: My package is marked as shipped but has no tracking updates?
A: We ship through a shipping partner who collects packages and imports them to your country and then they are shipped to the destination address through local postal services. As such the tracking will not update until the package has been successful handed off to the postal service.
Q: My order didn't come with a lock? / Why do you charge for locks?
A: Stubby Buddy cages are built to use a quite common lock used in the vast majority of chastity devices. Because of this, and the fact that Stubby Buddy primarily focuses on selling devices to chastity enthusiasts who more often than not already have multiple of these locks on hand we decided to move them to their own listing to reduce waste. Currently locks are unavailable to ship to USA address's due to ongoing tariffs on Chinese made products.
Q: Can I send you a picture wearing my cage?
A: I would very much prefer it if you don't. I cannot verify your age and there for cannot receive private illicit photographs from you. Your free to post your pictures on twitter/reddit/etc, at your own discretion.